SK9000 MOSFET - 2 CH Stereo Amplifier

Specification

• Press downwards to Power on and the led light will Glow. 
• Led Light Indicator. 
• This is loudness switch from which you will get high bass at low volume & This is classic switch from which you will get high treble at low volume. 
• This is master volume knob for adjusting the volume of amplifier. 
• This is a balance knob, keep it in the center so all speaker will work and if you feel that the bass is not clear then just interchange the 1 channel speaker wire. 
• This is a Bass knob, adjust it according to the master volume as volume increase the bass may effect so we have to lower the bass accordingly.
• This is a Treble knob, adjust it according to the master volume as volume increase the Treble may effect so we have to lower the treble accordingly. 
• This is HEADPHONE slot for headphones. 
• This is Mic volume where we can adjust volume for Mics.This is Karaoke system, Mic will work with all inputs like BLUETOOTH/ USB/ FM/ AUX/ SD. 
• This is a Echo control were we an adjust the echo level of microphone. 
• There are 2 Mic inputs of 6.3mm were we can use wired and wireless Mic. For better result don't take Mic closer to the speaker, and reduce the volume.